[ts-7000] Re: Question about an interrupt handler and debounce

["bdon003" <>]

--- In  "javierroitman" <> wrote:
>
> Have you tried the keypad.c sample located in the Technologic FTP site?
> You just have to connect your keypad to the keypad port (DIO1). 
> Although it is not a driver, you can use this code to start your own.
> Regards,
> Javier///
> 


     I have taken a look at that code and had planned on using parts
of it.  I'd need to go over that code again, but right now I am just
trying to get an idea of the overall code and setup, like what header
I will use and how the driver will be setup.

Thanks,
Brandon


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/