[ts-7000] Re: Question about an interrupt handler and debounce

["javierroitman" <>]

Have you tried the keypad.c sample located in the Technologic FTP site?
You just have to connect your keypad to the keypad port (DIO1). 
Although it is not a driver, you can use this code to start your own.
Regards,
Javier///

--- In  "bdon003" <> wrote:
>
> I am using the ts-7300 for my senior design project, and I am
> preparing to write a Linux driver for it.  Everything on the board is
> pretty much how I got it, same kernel and everything.  I need to hook
> up a 3x4 Matrix Keypad to the board and have it send an interrupt when
> a key has been pressed.  I am going to connect the three column data



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/