Jayne Dickinson wrote:
> Don't I need to install a tsuart driver for UART2 to become /dev/ttyS0 ?
> I went ahead and did the mknod /dev/ttyS0 -c 234 0 and did /etc/init.d/tsuart
> and still get this error
> $ more /tmp/tsuart.out
> Using tsuart
> insmod: not an ELF file
> insmod: Could not load the module: Success
>
>
> Yes this is the fastboot ...and I am not using the TS-9441 card, nor the
> sdcard for anything other than
> a filesystem for storage....
>
> examining dmesg....I never see TS-UART in the list..
>
>
> here's the result of dmesg and no mention of /dev/ttyTS0 being
> installed....hmmmm
Ok, I'll see if I can reproduce these results on my end...
______ Best Regards,
|__ __/ Michael Schmidt
|| Software Engineer
||echnologic Systems (EmbeddedARM.com)
|| (480) 16610 East Laser Drive #10
|/ 837-5200 Fountain Hills, AZ 85268
http://oz.embeddedarm.com/~michael
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|