Jayne Dickinson wrote:
> Thanks Michael...
> This still doesn't answer the question,
Sorry about that, I didn't recognize most of the log file you included
(what is tsuart.out? /mnt/root/etc, does that mean this is the fastboot
prompt?)
> I need access to all 3 com port drivers so I can open /dev/ttyAM0,
/dev/ttyAM1, and /dev/ttyTS0 for my application.
>
> I have disabled the getty by commenting the inittab lines where both ttyAM0
> and ttyAM1 are enabled.
> I need the tsuart.o since it creates the ttyTS0 driver...
If you don't see /dev/ttyTS0 I would recommend to look at dmesg and see
if there are driver messages mentioning a device node the TS-UART is at.
It may be necessary to do something (mknod with major=235, minor=1
maybe? or mount something? i forgot of the top of my head what 2.4
used...) to make /dev/ttyTS0 show up.
> Where can I find it on your web site...since the boot shows that it has
> failed....why is the insmod in the init.d
> if it is unsafe to load this driver anyway?
>
>
> Thanks for your help
> Jayne
______ Best Regards,
|__ __/ Michael Schmidt
|| Software Engineer
||echnologic Systems (EmbeddedARM.com)
|| (480) 16610 East Laser Drive #10
|/ 837-5200 Fountain Hills, AZ 85268
http://oz.embeddedarm.com/~michael
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|