allamack17 wrote:
> Does anyone know how to correctly set up the ts7kv to work on a ts7800
> board? So far I have powered up the board, enabled the PC104
> connection, and installed the drivers using insmod (fb, cfbcopyarea,
> cfbfillrect, cfbimgblt, ts7kvfb). Then when I tried to do load_ts7kv
> -v /etc/ts7kv.bit I got the following:
> ts7kv_numfound=0
> What am I missing?
You need to run load_ts7kv before loading the modules (or at least
before loading ts7kvfb), but that's probably not the problem you are
seeing here.
I would check to make sure you have the correct version of load_ts7kv.
There was a version floating around that appeared to work (i.e. the LED
on the TS-7KV would come on) but which was faulty. Be sure you have
the version specifically for the TS-7800.
The md5sum of the known-working version is dfb7e7411d2b3205cdc4363f4817284a
______ Best Regards,
|__ __/ Michael Schmidt
|| Software Engineer
||echnologic Systems (EmbeddedARM.com)
|| (480) 16610 East Laser Drive #10
|/ 837-5200 Fountain Hills, AZ 85268
http://oz.embeddedarm.com/~michael
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|