--- In "janne.kario" <> wrote:
>
> --- In Matthieu Crapet <mcrapet@> wrote:
>
> > This patch is tested on TS-7200 sbc. I have no idea of how It
works on
> > TS-72[56]0, but it should.
> > As usual, your comments and help are welcome.
> >
>
> I'm unable to get this to boot on my TS-7260. Just "Uncompressing
> Linux ... done, booting the kernel." and nothing else.
>
> My host is ubuntu amd64 and crosstools version
> "arm-linux-gnueabi-gcc-4.2 (GCC) 4.2.3 (Debian 4.2.3-5)".
>
> The image is available at
>
> http://perkkaankuningas.dyndns.org/zImage
>
> if someone would like to confirm whether it boots on a plain ts-
7200.
>
> I'm going to try different crosstools version from
>
> ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7260-linux/cross-toolchains/
>
7200 uses NOR flash , you will probably need to look out the patches
and/or configure for NAND and possibly yaffs2 . The 7200 could be
booting from CF.
You should probably at least check those issues before spending too
much effort swapping compilers.
HTH
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|