On Tue, May 20, 2008 at 1:46 PM, Mike Magee <> wrote:
> A year ago, jywmpg wrote:
>>
>> Back on the AERO board:
>>
>> On the two machines with AERO cards, I then
>> 1. copied the tsuart-rf.o file from the flash into by Debian file
>> system (/lib/modules/2.4.26-ts11/kernel/drivers/serial/)
>> 2. ran depmod
>> 3. ran modprobe tsuart-rf (creates /dev/ttyTS0)
>> 4. ran minicom, setting the serial device to /dev/ttyTS0, 57600 8N1.
>> Also deleted modem init string. Don't know if that was necessary
>> 5. typed text into a minicom window on one machine and it appeared in
>> the other minicom window on the other machine. Reversed the procedure
>> by typing in the other window, which worked as well.
>>
>> Thanks to Eddie and Engineers.
>>
>> jw
>>
>
> My setup is not working.
> I have two TS-7260 with RTC option and thwo TS-RF2 cards with the
> Aerocomm radios installed.
>
> 1. Copied the the tsuart-rf.o file from the TS 512MB SD card to my
> Debian file system
> (/lib/modules//lib/modules/2.4.26-ts11/kernel/drivers/serial/)
> 2. ran depmod
> 3. placed tsuart-rf in /etc/modules (creates /dev/ttyTS0):
> tsuart-rf TS-UART/RF2 found at port 0x0100
> ttyTS0 at I/O 0x89e00102 (irq = 40) is a TSUART
> 4. ran "./picocom -b57600 -fh /dev/ttyTS0" on both machines.
> Nothing. The cards don't even respond when I type "AT+++"
>
> What am I doing wrong?
I think, in the TS7260, ttyTS0 is the COM3 marked port.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|