A year ago, jywmpg wrote:
>
> Back on the AERO board:
>
> On the two machines with AERO cards, I then
> 1. copied the tsuart-rf.o file from the flash into by Debian file
> system (/lib/modules/2.4.26-ts11/kernel/drivers/serial/)
> 2. ran depmod
> 3. ran modprobe tsuart-rf (creates /dev/ttyTS0)
> 4. ran minicom, setting the serial device to /dev/ttyTS0, 57600 8N1.
> Also deleted modem init string. Don't know if that was necessary
> 5. typed text into a minicom window on one machine and it appeared in
> the other minicom window on the other machine. Reversed the procedure
> by typing in the other window, which worked as well.
>
> Thanks to Eddie and Engineers.
>
> jw
>
My setup is not working.
I have two TS-7260 with RTC option and thwo TS-RF2 cards with the
Aerocomm radios installed.
1. Copied the the tsuart-rf.o file from the TS 512MB SD card to my
Debian file system
(/lib/modules//lib/modules/2.4.26-ts11/kernel/drivers/serial/)
2. ran depmod
3. placed tsuart-rf in /etc/modules (creates /dev/ttyTS0):
tsuart-rf TS-UART/RF2 found at port 0x0100
ttyTS0 at I/O 0x89e00102 (irq = 40) is a TSUART
4. ran "./picocom -b57600 -fh /dev/ttyTS0" on both machines.
Nothing. The cards don't even respond when I type "AT+++"
What am I doing wrong?
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
mmagee.vcf
Description: Vcard
|