| To: | |
|---|---|
| Subject: | [ts-7000] Random state at DIO_14 of TS-7400 |
| From: | "gebbet00" <> |
| Date: | Mon, 19 May 2008 06:17:07 -0000 |
I've observed that state of DIO_14 is undetermined after power up. Is
that easily fixable? I'd like if to be either input or output with a
zero value. That's because I want to use that pin to enable power
output just after I've reset output registers so I don't have outputs
randomly activated after power up.
Is that random state of DIO_14 a bug or a feature?
Thanks in advance
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] Re: running a simple Hello World, research_labs80 |
|---|---|
| Next by Date: | [ts-7000] Re: usleep < 10 msec, Alexander Clouter |
| Previous by Thread: | [ts-7000] Re: usleep < 10 msec, Juerg Lehni |
| Next by Thread: | Re: [ts-7000] Random state at DIO_14 of TS-7400, Michael |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU