[ts-7000] TS-7800 strange tsuart behaviour

["cedric_roussel" <>]

Hello there,

I'm the owner of a brand new ts7800 board i'd like to use with
multiples serial devices. My problem is that i cant get every ports to
work. Some are ok and some won't talk...
I've tested my ports with a simple loopback wire connecting rx to tx
and here are the results:

ttyS0  ok
ttyS1  failed
ttts0  ok
ttts1  ok
ttts2  untested
ttts3  untested
ttts4  failed
ttts5  failed
ttts6  ok
ttts7  ok
ttts8  ok
ttts9  ok

pinout there:
http://www.embeddedarm.com/about/resource.php?item=303#uart

I'm currently running full distro from microsd slot but I hade the
same problem under fastboot...
dmesg does not complain and my modules md5 are:

fb71d4c375c724551dc7f2f4165a3392 
/lib/modules/2.6.21-ts/kernel/drivers/serial/tsuart1.ko

7639cb90e387ce7c4f2836a67b61f406 
/lib/modules/2.6.21-ts/kernel/drivers/serial/tsuart7800.ko

If you have any idea...
Thank you,
Cedric.


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/