Hi there,
I am using the ts-7300, and nothing as far as kernel or disto has been
changed on it. I
am using the board for my undergrad senior project. Over the summer I am just
trying to
get familiar with using the features. I am writing a program to make use of
the T1 timer and
handling an interrupt.
I believe I can setup the timer, but I am unsure how to set the interrupt
handler for when
the counter reaches zero. I am only slightly familiar with handling an
interrupt for a PIC, and
after reading the EP9302 users guide, this doesn't look like it works like a
PIC. On a PIC, I
would know where in memory the ISR was expected to be, and I would assign it to
be there.
How does it work on this microprocessor? Any other information you think might
be helpful
to me is welcomed as well.
Brandon
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|