[ts-7000] Powering 7800 off PC104 bus

To:
Subject:	[ts-7000] Powering 7800 off PC104 bus
From:	"bill.whiteley" <>
Date:	Thu, 17 Apr 2008 20:16:00 -0000

I have a PC104 75W power supply from Parvus and I would like to use 
this to power the 7800 and the rest of the stack for that matter. I 
tried just attaching it to the stack, but that doesn't power the 7800 
in the default configuration.

Is it possible to power the 7800 off the pc104 connector? If so how? 

Thanks,

Bill


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Powering 7800 off PC104 bus, bill.whiteley <=

Previous by Date:	[ts-7000] Re: How do I tell if the watchdog timer has gone off?, Mike Charnoky
Next by Date:	[ts-7000] Re: Power connection for TS-7800/TS-781 (BE CAREFUL), bill.whiteley
Previous by Thread:	[ts-7000] Re: How do I tell if the watchdog timer has gone off?, Mike Charnoky
Next by Thread:	[ts-7000] Re: Power connection for TS-7800/TS-781 (BE CAREFUL), bill.whiteley
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU