[ts-7000] Re: difference between rs232 and ttl COM port

["e.pifferi" <>]

can anyone help me ?
--- In  "e.pifferi" <> wrote:
>
> i ve loaded the two moduel with modprobe :
>                                            modprob tsuart1 
>                                            modprob tsuast7800
> after that i ve set the com3 (rs232 ) at 9600 and it work if i launch
> a bash command as cat /dev/ttts4 >> file.txt
> 
> but if i do the same thing with a ttl com for example ttts8 after that
> i setting it if i launch a cat /dev/ttts7 on LCD connector >> file.txt 
> it don't seems to catalog nothing 
> 
> Ive attached to it a gps and it was in continuos stream data ( in
> binary or nmea format ) 
> ive connected to pin 14 of lcd port as in your guide is described tnks
> to all for an answer .Emiliano
>



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/