[ts-7000] initialization of DIO port on TS-7200

To:
Subject:	[ts-7000] initialization of DIO port on TS-7200
From:	"s_sulphur" <>
Date:	Mon, 07 Apr 2008 12:31:06 -0000

hi,
I want to ask something... how to initialize DIO pin? for my project, i 
want to use DIO pin as an output. may i know any explaination about 
initializing DIO pin for output? anyone can help me or share any 
references about this? i already referred to the manual..but it not 
enough for me to understand..ok..
TQ.


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] initialization of DIO port on TS-7200, s_sulphur <= Re: [ts-7000] initialization of DIO port on TS-7200, Jim Jackson

Previous by Date:	[ts-7000] Re: How to create a sdcard for TS7300, tvman_od
Next by Date:	[ts-7000] Re: difference between rs232 and ttl COM port, e.pifferi
Previous by Thread:	[ts-7000] Trouble loading Debian from a USB drive, sam27gt
Next by Thread:	Re: [ts-7000] initialization of DIO port on TS-7200, Jim Jackson
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU