yes i see under dev directory ttts* peripheral but if i launch
stty -F /dev/ttts4 9600
stty: /dev/ttts4: No such device or address
or
stty -F /dev/ttyS4 9600
stty: /dev/ttyS4: Input/output error
whats wrong ?
:/# stty -F /dev/ttts4 9600
stty: /dev/ttts4: No such device or address
--- In "Michael" <> wrote:
>
> > how i can do this ?
> > You may need to run a command to make it show up (e.g.
> > mdev -s) if udev isn't running...)
> > how i can run udev ?
> > wich sintax ?
> > i ve loaded the two module tsuart1 and tsuart7800 and all ok if i
> > digit lsmod i se them i hope u write me back soon
>
> Do you see /dev/ttts* files? If so then you should be good to go...
if not,
> then run "mdev -s" and that should populate the files.
>
>
> ______ Best Regards,
> |__ __/ Michael Schmidt
> || Software Engineer
> ||echnologic Systems (EmbeddedARM.com)
> || (480) 16610 East Laser Drive #10
> |/ 837-5200 Fountain Hills, AZ 85268
> http://oz.embeddedarm.com/~michael
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|