> another question : com3 corrispond to ttyS2 ?
> is active directly or i must load the module tsuart7800?
http://oz.embeddedarm.com/~michael/support/ts7800.html#uart
COM3 is TS-UART #4. After loading tsuart1 and tsuart7800 it should show up
at /dev/ttts4. (You may need to run a command to make it show up (e.g.
mdev -s) if udev isn't running...)
______ Best Regards,
|__ __/ Michael Schmidt
|| Software Engineer
||echnologic Systems (EmbeddedARM.com)
|| (480) 16610 East Laser Drive #10
|/ 837-5200 Fountain Hills, AZ 85268
http://oz.embeddedarm.com/~michael
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|