Could either of you send me your makefile? I'm having trouble getting
it to compile and I'd like to have a known one to compare to.
Thanks a lot guys!
Brandon
--- In "zafrie_leandazz11"
<> wrote:
>
> --- In "Fabio Vaz" <fvazsilva@> wrote:
> >
> > Hello,
> >
> > I'm having a hard time trying to get some webcams working on my TS-
> > 7200 boards. I'm running Kernel 2.4.26-ts11.
> >
> > I compiled the latest version of spca5xx full driver (spca5xx-
> > v4l1goodbye.tar.gz) and It works fine with an old webcam I have here.
> > Vendor: (0x04fc, 0x0561). I use videodog or vgrabbj and both get the
> > pictures just fine. When I connect this camera it shows me in the
> > log :
> > drivers/usb/spca5xx.c: USB SPCA5XX camera found. Type Flexcam 100
> > (SPCA561A)
> > drivers/usb/spca5xx.c: [spca5xx_probe:5485] Camera type S561
> > drivers/usb/spca5xx.c: [spca5xx_getcapability:1767] maxw 352 maxh 288
> > minw 160 minh 120
> >
> >
> > With a Genius Messenger webcam vendor (0c45:602e): . When I connect
> > it I get the following on the log :
> > drivers/usb/spca5xx.c: USB SPCA5XX camera found. SONIX sn9c102 +
> > Ov7630
> > drivers/usb/spca5xx.c: [spca5xx_probe:5485] Camera type SN9C
> > drivers/usb/spca5xx.c: [spca5xx_getcapability:1767] maxw 640 maxh 480
> > minw 160 minh 120
> >
> > With Genius webcam when I call the same commands to capture a picture
> > (vgrabbj or videodog), the linux simply hangs and returns no error
> > messages. I have to power off and on to continue working. So I can't
> > get any logs. I tested another webcam supported by the driver
> > vendor : 0ac8:307b Z-Star Microelectronics Corp. I got the same
> > problem.
> >
> > The modules I have loaded are :
> > spca5xx 607932 0
> > ppp_async 6736 1
> > ppp_generic 17140 3 [ppp_async]
> > slhc 4856 0 [ppp_generic]
> > videodev 6552 1 [spca5xx]
> > pl2303 11724 1
> > usbserial 18824 0 [pl2303]
> > hci_uart 11404 0 (unused)
> > sco 8668 0 (unused)
> > rfcomm 31296 1
> > hci_usb 8144 1
> > l2cap 15676 2 [rfcomm]
> > bluez 30428 3 [hci_uart sco rfcomm hci_usb l2cap]
> > usb-ohci-ep93xx 892 0 (unused)
> > usb-ohci 15580 0 [usb-ohci-ep93xx]
> > usbcore 55944 1 [spca5xx pl2303 usbserial hci_usb
> > usb-ohci]
> > pcipool 2080 1 [usb-ohci-ep93xx usb-ohci]
> > af_packet 9456 0 (unused)
> >
> >
> > Do you know what can it be ?
> >
> >
> > Thank you very much in advance,
> > Fabio Vaz.
> >
>
>
>
> Hello,
>
> I'am a newbie in Linux and I'am developing an image capture and
> storage in SBC board application. I also have a problem on how to
> install the spca5xx webcam driver for ARM TS-7200 kernel 2.4.26 ts9.
> which the driver I've download from
> http://mxhaard.free.fr/download.html. referring to the readme install
> file which came along in the driver folder, I dont understand the
> first 3 line :- make (configure kernel)
> make dep
> make clean
>
> it's state that for kernel 2.4. we have to configure the kernel and
> 'make dep'. Since you state that you already done this installation in
> one of your webcam, can you give some guide regarding to the step that
> I've to do? what do I need to configure in the kernel as state in the
> readme file? or is it just simply follow exactly on the command line
> given in the readme file then it works? Can you give some
> documentation that you refer? I really appreciate it if you give me
> feedback.
>
> Regarding to your problem, I have a compiled driver for spca5xx
> for ts11 version and it works fine in my friend webcam.You better try
> that driver first. I can send it to your e-mail. Let me know if you
> want it.
>
>
> Regards,
> Zafrie
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|