Re: [ts-7000] Problem with **>> flash ECC error! and mtdcopy

[Phillip Chung <>]

Hi,

>     /bin/sh: ./mtdcopy: not found

probably indicates that a library file couldn't be found to execute mtdcopy.

In your /mnt/root directory you may need to have a subdirectory named /lib with the files libc.so.6 and ld-linux.so.2 in it.

Regards,

Phillip

betobanton <> wrote:

I'm having problems with my TS-FLASHBOOT on a TS-7400 RevA
without TS-9441 BOOT jumper
>> TS-FLASHBOOT - built Jan 26 2007
>> Copyright (c) 2007, Technologic Systems
.
**>> flash ECC error!

When I use the TS-9441 with the jumper on BOOT position
the TS-FLAHBOOT load ok, but i need do restore the Boot to use
without the TS-9441.

I already tried to use the "save" option metioned on the
ts-7400-info.txt, but it didn't worked for me.
I also tried to use the mtdcopy
I have a NFS partition that I mounted on the /mnt/root
On the NFS I put this files:
dir/__ mbr-7400-1.00.dd
|_ mtdcopy

detailed process:
1.reseted the board with the TS-9441 and the BOOT jumper
>> TS-SPIFLASHBOOT - built Jan 26 2007
>> Copyright (c) 2007, Technologic Systems
.
.
.
Finished booting in 2.76 seconds
Type 'tshelp' for help
$

2.isnmod ts7xxx_nand.o (the same that the command "mtdmount")
3.configure the local IP
4. mount the NFS with the command "mount IpOfServer:/dir/ /mnt/root"
(at this point everething is OK)
5. enter on the /mnt/root
$ls -l
-rw-r--r-- 1 0 0 16384 Mar 11 2008 mbr-7400-1.00.dd
-rwxr-xr-x 1 0 0 18744 Mar 11 2008 mtdcopy

6.I tried to use the command:
$ ./mtdcopy mbr-7400-1.00.dd 0 0
/bin/sh: ./mtdcopy: not found

and there is the problem...that I don't understand

I tried to make link to the /bin and other try to /mnt/root/bin
but no success... the system didn't found the mtdcopy.

I have success on run mtdcopy on the tslinux after the exit, using
the linux image of the /dev/mtdblock/3
the command appears to run OK but without any effect on my problem

Please could anyone help-me with this question.

---

Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.
__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___