ts-7000
[Top] [All Lists]

[ts-7000] Problem with **>> flash ECC error! and mtdcopy

To:
Subject: [ts-7000] Problem with **>> flash ECC error! and mtdcopy
From: "betobanton" <>
Date: Tue, 11 Mar 2008 23:42:13 -0000
I'm having problems with my TS-FLASHBOOT on a TS-7400 RevA
without TS-9441 BOOT jumper
>> TS-FLASHBOOT - built Jan 26 2007
>> Copyright (c) 2007, Technologic Systems
.
**>> flash ECC error!

When I use the TS-9441 with the jumper on BOOT position
 the TS-FLAHBOOT load ok, but i need do restore the Boot to use 
without the TS-9441.

I already tried to use the "save" option metioned on the
ts-7400-info.txt, but it didn't worked for me.
I also tried to use the mtdcopy
I have a NFS partition that I mounted on the /mnt/root
On the NFS I put this files:
dir/__ mbr-7400-1.00.dd
    |_ mtdcopy

detailed process:
1.reseted the board with the TS-9441 and the BOOT jumper
   >> TS-SPIFLASHBOOT - built Jan 26 2007
   >> Copyright (c) 2007, Technologic Systems
   .
   .
   .
   Finished booting in 2.76 seconds
   Type 'tshelp' for help
   $

2.isnmod ts7xxx_nand.o (the same that the command "mtdmount")
3.configure the local IP
4. mount the NFS with the command "mount IpOfServer:/dir/ /mnt/root"
(at this point everething is OK)
5. enter on the /mnt/root
   $ls -l
   -rw-r--r--    1 0   0  16384 Mar 11  2008 mbr-7400-1.00.dd
   -rwxr-xr-x    1 0   0  18744 Mar 11  2008 mtdcopy

6.I tried to use the command:
   $ ./mtdcopy mbr-7400-1.00.dd 0 0
   /bin/sh: ./mtdcopy: not found

and there is the problem...that I don't understand

  I tried to make link to the /bin and other try to /mnt/root/bin
but no success... the system didn't found the mtdcopy.


   I have success on run mtdcopy on the tslinux after the exit, using
the linux image of the /dev/mtdblock/3
the command appears to run OK but without any effect on my problem


   Please could anyone help-me with this question.




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU