--- In Richard Sharpe <> wrote:
>
> Hi,
>
> > As the TS-7800 and the Kurobox Pro NAS are pretty similar, can we
> > assume the JTAG pinout's are the same?
> >
> > http://kurobox.com/mwiki/index.php/Add_Jtag_Port
> >
> > Although I know very little about JTAGing at all I have read a
> > 16pin JTAG interface, such as the one labelled next to the first
> > UART port, for an ARM board is not 'natural'. :)
>
> We have a board based on a standard Marvell design for the 5181 and
> it too has a 16-pin JTAG socket on it. When you insert the JTAG
> cable plug you have to seat it properly at the correct end of the
> socket, leaving two pins exposed, because the normal JTAG plug we
> use has 14 pins.
Sigh. I misremembered. It was our older FreeScale based board that had
the 16-pin socket that we used to put a 14-pin header into.
On the newer, Marvell-based design, we use a standard 20-pin JTAG socket.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|