Hi,
> As the TS-7800 and the Kurobox Pro NAS are pretty similar, can we assume the
> JTAG pinout's are the same?
>
> http://kurobox.com/mwiki/index.php/Add_Jtag_Port
>
> Although I know very little about JTAGing at all I have read a 16pin JTAG
> interface, such as the one labelled next to the first UART port, for an ARM
> board is not 'natural'. :)
We have a board based on a standard Marvell design for the 5181 and it too
has a 16-pin JTAG socket on it. When you insert the JTAG cable plug you
have to seat it properly at the correct end of the socket, leaving two
pins exposed, because the normal JTAG plug we use has 14 pins.
Regards
-------
Richard Sharpe, rsharpe[at]richardsharpe.com, rsharpe[at]samba.org,
sharpe[at]ethereal.com, http://www.richardsharpe.com
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|