Re: [ts-7000] Re: Wlan0 dhcp setup

[Richard Sharpe <>]

On Sat, 8 Mar 2008, osmicadu wrote:

>> Try running udhcpc manually to see the output.
>>
>
> nothing I just get:
> info, udhcpc (v0.9.9-pre) started
> debug, Sending discover...
> debug, Sending discover...
> debug, Sending discover...
> debug, Sending discover...
> debug, Sending discover...
> debug, Sending discover...
>
> i have a file in
> /etc/sysconfig/ifcfg-wlan0
> and it is set on dhcp not static
> to get eth0 working on dhcp I only changed the file
> /etc/sysconfig/ifcfg-eth0
>
> File ifcfg-wlan0 I did not have originally on my TS-7250 I made it and
> it says:
>
> DEVICE=wlan0
> IPADDR=192.168.01.100
> NETMASK=255.255.255.0
> NETWORK=192.168.0.0
> BROADCAST=192.168.0.255
> #BOOTPROTO=static
> BOOTPROTO=dhcp
> ENABLE=yes

So, does it work with a manually assigned IP address? Sounds like you have 
an incorrect SSID or the wireless link has not come up properly for some 
reason.

Also, is the DHPC server offering IP addresses on the wireless subnet?

Regards
-------
Richard Sharpe, rsharpe[at]richardsharpe.com, rsharpe[at]samba.org,
sharpe[at]ethereal.com, http://www.richardsharpe.com


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/