Hello,
Can somebody tell me how to setup dhcp on my wlan0 device. I am using
TS-7250 with Iogear stick the driver I am using is zd_b.o and I have
no problems with it.
The problem is that after I get the wlan0 up with:
ifconfig wlan0 up
it does not get an IP address over dhcp. Now how do I start the dhcp.
I can see my AP with
iwconfig wlan0
and everything is OK. but I do not get the IP address.
When I use
ifconfig wlan0 xx:xx:xx:xx
where xx:xx:xx:xx is the IP from my network it works i can ping other
computers on the network but not the internet because there is no
gateway and DNS sever ip for wlan0. Do I have to make a file
ifcfg-wlan0 in /etc/sysconfig/ ? I yes can somebody tell me what to
put in that file.
Thanks
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|