--- In "Geri" <> wrote:
>
> [snipped]
> The problem I have is
> not on the target machine, it is on the MS-Windows-plattform. Here I
> have installed the crosstool including cygwin and want to compile
> the helloworld-application.
Hi Geri,
How did you untar the crosstools?
It must be untarred exactly as described in documentation, with tar,
otherwise the symbolic links will be broken (potentially non-existent
if you use Windows facilities like drag and drop, winzip, etc. - A
reoccurring problem for developers even though Cygwin is good and
doing a decent job some things done by Windows can obscure what is
going on).
> [snipped]
> I downloaded the crosstool on the Server of TS:
>
> ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7300-linux/cross-toolchains/
Did you read and follow the README at that location?
----
Andy
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|