[ts-7000] Re: Potential across the DTS & Ground on 7200 com port

["j.chitte" <>]

--- In  "Ashley" <> wrote:
>
> My first Ts-7200 is in the mail but I can't wait to start working on
> it.  I need to know what the volts are between the dtr(pin 4)and
> ground pin 5 and the rts(pin 7) and ground (pin 5) on the com 1 and
> com 2  rs232 ports. 
> 
> I from what I have been reading rs232 on a computer is 12v but could
> be less on the ts-7200.
> 
> Thanks,
> Paul
>

There's not 12V on the TS72xx boards, you can bet it's 5V.

Dont have physical acces to by board but I'm pretty sure that's what 
it was when I checked.

/js



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/