[ts-7000] Re: Potential across the DTS & Ground on 7200 com port

["j.chitte" <>]

--- In  Bert Thomas <> wrote:
>
> > There's not 12V on the TS72xx boards, you can bet it's 5V.
> 
> There are levelconverters for the RS232 signals. They produce +10V 
and -10V.
>

If you pull the schematic off the TS web site it show a Sipex 213 as 
teh RS232 interface chip. The data sheet http://www.ortodoxism.ro/
datasheets/sipex/SP207ET.pdf indicates this has +/-7V typical +/-5V 
min.





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/