> Hi,
>
> I found the ts series of boards while looking at the opencores website.
>
> They all look very impressive, but I had a question about the ts-7800
> that I could not find in the documentation.
>
> Is it possible to adjust the clock speed by software, and disable
The only way to adjust the clock speed is using JP3 at startup.
> various parts of the board by powering them down while the board is
> running?
I'm not aware of any, but you might want to persue the manual for the SOC to
double-check this. There is a link to the latest publically available
manual that I am aware of in the preliminary TS-7800 manual
(http://oz.embeddedARM.com/~michael/support/ts7800.html)
>
> Regards,
>
> Phil
>
______ Best Regards,
|__ __/ Michael Schmidt
|| Software Engineer
||echnologic Systems (EmbeddedARM.com)
|| (480) 16610 East Laser Drive #10
|/ 837-5200 Fountain Hills, AZ 85268
http://oz.embeddedarm.com/~michael
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|