[ts-7000] Intro and question about the 7800

To:
Subject:	[ts-7000] Intro and question about the 7800
From:	"Philip Trickett (List)" <>
Date:	Tue, 12 Feb 2008 17:39:27 +0000

Hi,

I found the ts series of boards while looking at the opencores website.

They all look very impressive, but I had a question about the ts-7800
that I could not find in the documentation.

Is it possible to adjust the clock speed by software, and disable
various parts of the board by powering them down while the board is
running?

Regards,

Phil 



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Intro and question about the 7800, Philip Trickett (List) <= Re: [ts-7000] Intro and question about the 7800, Michael

Previous by Date:	[ts-7000] Re: TS-7260: boot to USB - can't mount flash, alexanchoragealaska
Next by Date:	[ts-7000] TS7800 and TS-UARTs, Justin Teems
Previous by Thread:	[ts-7000] Fast matrix routines for ARM-linux?, papp_lapp
Next by Thread:	Re: [ts-7000] Intro and question about the 7800, Michael
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU