> Hi Mike,
>
> Before and after updating the driver, I'm only seeing 8 devices...
> /dev/ttts1 through /dev/ttts8. At this point I'm just trying to
> minicom on /dev/ttts4 to a standard serial port on my PC. I'm getting
> a minicom: cannot open /dev/ttts4: No such device or address. Thoughts?
Do you see a /dev/ttts0? There was a typo bug that was fixed on Jan 21
which caused the driver to only initialize 9 out of the 10 ports. You may
need to check the location you are installing the tsuart7800.ko driver to...
IIRC it should go in the root directory of the initrd (if you are copying it
from the fastboot prompt you need to use the 'save' command to update the
ramdisk image on flash).
______ Best Regards,
|__ __/ Michael Schmidt
|| Software Engineer
||echnologic Systems (EmbeddedARM.com)
|| (480) 16610 East Laser Drive #10
|/ 837-5200 Fountain Hills, AZ 85268
http://oz.embeddedarm.com/~michael
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|