Re: [ts-7000] Re: TS7300 FPGA UART

[amit singh <>]

hi Peter,

how i can use FPGA UART i.e (COM3, COM4, COM5, COM6,)
or (/dev/ttyT8S3, /dev/ttyT8S4....), i want to configure multilink PPP with these 4 com ports.

will u please guide me or send me 1 dummy code, so that i can excess FPGA UART.


regards
Amit.





PeterElliot <> wrote:

Hi dinesh & Amit,

The default FPGA load has the additional UARTS active on powerup, all
you need to do is find the correct /DEV/tty device. From memory I
think it's something like /dev/ttyT8Sx where 'x' is the port number.

Look in the /dev directory and see what ports are available.

Regards,

PJE

--- In .com, "ts7300" <> wrote:
>
> Hi,
> We are using TS7300 board and we want to use FPGA UART present on
> TS-7300 board. so please guide me how i can use FPGA UARTs. we know
> that tsuart.BIT file of UART is already their and its driver is
also
> present but we dont know how to use all these.
>
> my application is to implement "Quard UART Multilink PPP"
>
> so please guide me.
>
>
> regards
> dinesh & Amit
>

---

Looking for last minute shopping deals?  
  Find them fast with Yahoo! Search.
__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___