Hi dinesh & Amit,
The default FPGA load has the additional UARTS active on powerup, all
you need to do is find the correct /DEV/tty device. From memory I
think it's something like /dev/ttyT8Sx where 'x' is the port number.
Look in the /dev directory and see what ports are available.
Regards,
PJE
--- In "ts7300" <> wrote:
>
> Hi,
> We are using TS7300 board and we want to use FPGA UART present on
> TS-7300 board. so please guide me how i can use FPGA UARTs. we know
> that tsuart.BIT file of UART is already their and its driver is
also
> present but we dont know how to use all these.
>
> my application is to implement "Quard UART Multilink PPP"
>
> so please guide me.
>
>
> regards
> dinesh & Amit
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|