--- In Eddie Dawydiuk <> wrote:
>
> Hello,
>
> > Can someone point me to some docs for the EEPROM on the TS7300?
>
> There really isn't much documentation on the EEPROM. The EEPROM is used
> to store the preboot code, MAC address, and some other system specific
> meta-data that we don't recommend users modify.
The ADC on our 7300 isn't calibrated. When I run the sample code, all
values are 0xffff except for the first, which is 0xff43. I'm quite
happy to calibrate it myself except I can't write the EEPROM either.
I would rather the calibration tables be in the EEPROM, but if I have
to I'll store it on the SD card. How do I write to the EEPROM?
Thanks,
-harold
>
> > I am trying to rewrite the sample ADC code to eliminate the use of
> > PEEK/POKE. I've got everything working, except that I can't seem to
> > get the part where you read the calibration values right.
> >
> > The 'empty FIFO' while loop never terminates.
>
> Interesting, did you get this sorted out?
>
> --
> Best Regards,
> ________________________________________________________________
> Eddie Dawydiuk, Technologic Systems | voice: (480) 837-5200
> 16610 East Laser Drive Suite 10 | fax: (480) 837-5300
> Fountain Hills, AZ 85268 | web: www.embeddedARM.com
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|