at minimum i believe you have to load the fpga code up.
I too want to get rid of the initial log on the ts7300, well not so much the
logo , its the flashing
cursor and the framebuffer writes i want to be gone.
i'd intented to try removing various modules to see which it'd be that did the
trick.
I'd like the keep the /dev/fb since then you can query the size/bitdepth just
in case i feel like
using the 800x600.
I use the memory layout/blitter too on the TS-7300, i don't think its any
different from the TS7KV
did you mean car or card, i'm doing a CarPC with mine.
> --- In "Laks" <> wrote:
> I may be completely wrong on this, since my TS7KV card is still in the post
> to me, but you
> don't need to load any modules at all.
>
> There is no real API for drawing on the display unless you install QT - but
> that's far too big
> for my needs. So you will have to do your own drawing, and you don't need
> the modules
> listed.
>
> fbgen gives you the /dev/fb/0 device. As mentioned, you can't just cat
> something.jpeg >
> /dev/fb/0, it will have to be in the 5/6/5 colour format mentioned before.
>
> And I assume the fbcon-cfb16 is giving you the console on the frame buffer,
> exactly what
> you don't want.
>
> It looks like Peter Elliott is ahead of the game, except he uses the fram
> buffer on the
> TS7800, which seems to have slightly different interface than the TS7KV on a
> TS7250.
>
> Expect LOTS of dim questions when my car arrives!
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|