[ts-7000] more bat3 q's

["Charlie Wallace" <>]

I left my ts 7300 running all nite with the

bat3 --charge 400 &

 

i notice the batterys are warm, i get this report from bat3

 

Supply Voltage ADC    = 707F
Regulated Voltage ADC = 6B01
Battery Voltage       = 4.17V (C5FB)
Battery Current       = -12060uA
PWM LO = 00E2
PWM T  = 01F4
TEMP   = 93.9F
PWM 1 EN  = OFF
PWM 2 EN  = OFF
OFFSET EN = OFF
OPAMP EN  = ON
BUCK EN   = OFF
LED       = ON
JP3       = OFF
Running on LINE VOLTAGE

 

it seems like it should have charged fully and switched off, or is it going to drain/charge etc even though its on line power? its being going for at least 14 hours.

 

 

will it switch to a trickle charge, i guess i can just read the code.

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___