Thanks for that
Things seem to be working except for anything on COM3 - the port opens
ok and sets the baudrate etc, but I never seem to get anything on the
terminal window on the other end.
Since the others are all working ok, I guess it must be some other
issue stopping anything on the com 3 header from working.
--- In "Michael Schmidt" <> wrote:
>
>
> On Wed, January 2, 2008 1:09 pm, JD wrote:
> > ok,
> >
> > Got a little confused previously when mknod /dev/ttyS3 was used for
> > the first ts port, and made me think that perhaps the 3rd port was CPU
> > based.
>
> Well it is a little confusing because the first two TS-UARTs are
actually
> on the flow control pins for COM1 and 2. The third TS-UART is
actually on
> the normal COM3 pins.
>
> >
> > Is there a document that says which com port corresponds to which on
> > the DB9 connectors (apart from the com1,2&3)?
>
> This information is in the preliminary TS-7800 manual at
> http://oz.embeddedarm.com/~michael/support/ts7800.html, under the
"UARTs"
> section.
>
> > The comports info.txt file just says howmany there are, whilst the
> > schematic shows the ppinds but named using the cts/rts name, but I
> > didnt see any reference to say which was for which.
>
>
> ______ Best Regards,
> |__ __/ Michael Schmidt
> || Software Engineer
> ||echnologic Systems (EmbeddedARM.com)
> || (480) 16610 East Laser Drive #10
> |/ 837-5200 Fountain Hills, AZ 85268
> http://oz.embeddedarm.com/~michael
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|