[ts-7000] Re: Serial port example for TS7800

["JD" <>]

ok, using your code to set up the serial ports, the baud rate doesnt
seem to get set.

If i put print statements in there for printing the fd, and the result
of tcgetattr and tcsettattr along with a perror print after the get/set
calls, I get an error for the comports above the 2nd one.
Print out:
try open 2 : '/dev/ttyS2'
fd = 5
ret for tcgetattr = -1
tcgetattr:: Input/output error
ret for tcsetattr = -1
tcsetattr:: Input/output error

I have the uart modules loaded:
> lsmod
Module                 Size                 Used by
tsuart7800         1796      0
tsuart1                  13676    1     tsuart7800
tssdcard               28352    0
ts7800                 3696       2





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/