ts-7000
[Top] [All Lists]

RE: [ts-7000] How to create bootable SD card for TS-7300

To: <>
Subject: RE: [ts-7000] How to create bootable SD card for TS-7300
From: "Matias Bustos" <>
Date: Fri, 30 Nov 2007 09:19:46 -0300

 

Hi Andrew

You can find info on copying sd cards for the ts-7300 here:

 

http://www.seiner.com/mediawiki/index.php/Copying_boot_sdcard

 

Matias

 


De: [ En nombre de aqueisser
Enviado el: Jueves, 29 de Noviembre de 2007 21:07
Para:
Asunto: [ts-7000] How to create bootable SD card for TS-7300

 

I've got a TS-7300 that boots from the SD card that it shipped with.
I'd like to build my own bootable card so I don't risk destroying the
one I know works today.

I followed the instructions from the ARM Linux user manual but I think
there's something missing. The user manual instructs to format the
entire disk as ext2 (did that) und unzip the tarball with the debian
distribution (did that) but the SD card that shipped with the board has
three partitions and I think that's needed for anything to really work.
The tarball didn't seem to have the stuff needed to boot up the kernel.

Can someone please tell me how to set up a TS-7300 bootable SD with the
latest stuff from Technologic?

I was using fdisk and mkfs from Ubuntu 7.10 to set up the SD card. Any
particular options or concerns with that?

Thanks much,
Andrew Queisser

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--
La información contenida y el presente mensaje son confidenciales y para el uso exclusivo de la persona o entidad destinataria. Se prohíbe cualquier tipo de reproducción, divulgación o distribución que no haya sido autorizado previamente por CIMM Tecnologías y Servicios S.A. quien, además, no se hace responsable por la transmisión completa y adecuada de la información contenida y el mensaje, retrasos en la recepción, integridad de la misma o que éstas se encuentren libres de virus, intercepción o interferencia alguna. Si Ud. no es la persona a quien se dirige esta comunicación favor de devolverla a su remitente y borrar y destruir todas las copias de la misma.
--
La información contenida y el presente mensaje son confidenciales y para el uso exclusivo de la persona o entidad destinataria. Se prohíbe cualquier tipo de reproducción, divulgación o distribución que no haya sido autorizado previamente por CIMM Tecnologías y Servicios S.A. quien, además, no se hace responsable por la transmisión completa y adecuada de la información contenida y el mensaje, retrasos en la recepción, integridad de la misma o que éstas se encuentren libres de virus, intercepción o interferencia alguna. Si Ud. no es la persona a quien se dirige esta comunicación favor de devolverla a su remitente y borrar y destruir todas las copias de la misma.
<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU