On Nov 29, 2007 3:14 AM, Paolo Marras <nibapa%40yahoo.com> wrote:
>
>
>
>
>
>
>
>
>
>
> Hi,
>
> I have problems in setting up the wireless in my TS-7300
>
> these are the modules loaded:
> ************ ********* ********* ********* ********* ***
> : root# lsmod
> Module Size Used by Not tainted
> zd_b 278240 1-->just downloaded from embedded arm FTP
> site
> af_packet 9456 0 (unused)
> open_eth 4448 0 (unused)
> tsuart-73 1380 0 (unused)
> tsuart0 9128 0 [tsuart-73]
> keybdev 1772 0 (unused)
> hid 13520 0 (unused)
> input 3320 0 [keybdev hid]
> usb-ohci-ep93xx 632 0 (unused)
> usb-ohci 15360 0 [usb-ohci-ep93xx]
> usbcore 55728 1 [zd_b hid
usb-ohci]
> pcipool 1888 1 [usb-ohci-ep93xx usb-ohci]
> ts7300fb 3944 63
> fbcon-cfb16 3528 0 [ts7300fb]
> fbgen 2944 0 [ts7300fb]
> sdcard0 12304 1
> ************ ********* ********* ********* *********
> and this is the network configuration:
>
> wlan0 Link encap:Ethernet HWaddr 00:02:72:5D: 7C:3F
> inet addr:192.168. 1.20 Bcast:192.168. 1.255 Mask:255.255. 255.0
> UP BROADCAST MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:2 dropped:0 overruns:0 frame:2
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
>
> wlan0 802.11b/g NIC ESSID:"CasaOlgiate"
> Mode:Managed Frequency=2. 437 GHz Access Point: Not-Associated
> Bit Rate:11 Mb/s
> Retry:off RTS thr=2432 B Fragment thr:off
> Encryption key:****-*** *-****-** **-****-* ***-** Security
>
mode:open
> Power Management:off
> Link Quality:98/100 Signal level:98/100 Noise level:7/100
> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
> Tx excessive retries:0 Invalid misc:40 Missed beacon:0
>
> while the interface correctly gets the access point:
>
> : root# iwlist wlan0 scanning
> wlan0 Scan completed :
> Cell 01 - Address: 00:19:5B:77: 7C:04
> ESSID:"CasaOlgiate"
> Mode:Master
> Frequency:2. 437 GHz (Channel 6)
> Extra:SignalStrengt h=100%,LinkQuali ty:24%
> Encryption key:on
> Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
> 12 Mb/s; 24 Mb/s; 36 Mb/s
> Extra:bcn_int= 100
>
> it still remains in Not-Associated mode and wireless network interface
> doesn't ping.
>
> Does someone knows why?
>
> Thanks
>
> NBP
>
Try turning off the encryption and see if
you can get it to associate.
Steve