[ts-7000] ts-7300 wireless problem

[Paolo Marras <>]

Hi,

 

I have problems in setting up the wireless in my TS-7300

 

these are the modules loaded:

***************************************************

m("ts7000","root");:root" target="_blank" href=":root">:root# lsmod
Module                  Size  Used by    Not tainted
zd_b                  278240   1-->just downloaded from embedded arm FTP site
af_packet               9456   0  (unused)
open_eth                4448   0  (unused)
tsuart-73               1380   0  (unused)
tsuart0                 9128   0  [tsuart-73]
keybdev                 1772   0  (unused)
hid                    13520   0  (unused)
input                   3320   0  [keybdev hid]
usb-ohci-ep93xx          632   0  (unused)
usb-ohci               15360   0  [usb-ohci-ep93xx]
usbcore                55728   1  [zd_b hid usb-ohci]
pcipool                 1888   1  [usb-ohci-ep93xx usb-ohci]
ts7300fb                3944  63
fbcon-cfb16             3528   0  [ts7300fb]
fbgen                   2944   0  [ts7300fb]
sdcard0                12304   1

************************************************

and this is the network configuration:

 

wlan0     Link encap:Ethernet  HWaddr 00:02:72:5D:7C:3F
          inet addr:192.168.1.20  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:2 dropped:0 overruns:0 frame:2
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

 

wlan0     802.11b/g NIC  ESSID:"CasaOlgiate"
          Mode:Managed  Frequency=2.437 GHz  Access Point: Not-Associated
          Bit Rate:11 Mb/s
          Retry:off   RTS thr=2432 B   Fragment thr:off
          Encryption key:****-****-****-****-****-****-**   Security mode:open
          Power Management:off
          Link Quality:98/100  Signal level:98/100  Noise level:7/100
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:40   Missed beacon:0

 

while the interface correctly gets the access point:

 

m("ts7000","root");:root" target="_blank" href=":root">:root# iwlist wlan0 scanning
wlan0     Scan completed :
          Cell 01 - Address: 00:19:5B:77:7C:04
                    ESSID:"CasaOlgiate"
                    Mode:Master
                    Frequency:2.437 GHz (Channel 6)
                    Extra:SignalStrength=100%,LinkQuality:24%
                    Encryption key:on
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              12 Mb/s; 24 Mb/s; 36 Mb/s
                    Extra:bcn_int=100

 

it still remains in Not-Associated mode and wireless network interface doesn't ping.

 

Does someone  knows why?

 

Thanks

 

NBP

---

Get easy, one-click access to your favorites. 
 Make Yahoo! your homepage.


__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___