ts-7000
[Top] [All Lists]

[ts-7000] Re: ts-7300 wireless problem

To:
Subject: [ts-7000] Re: ts-7300 wireless problem
From: "Gonzalo A. de la Vega" <>
Date: Thu, 29 Nov 2007 22:18:21 -0000
--- In  Paolo Marras <> wrote:
>
> 
> 
> 
> Hi,
> 
>  
> 
> I have problems in setting up the wireless in my TS-7300
> 
>  
> 
> these are the modules loaded:
> 
> ***************************************************
> 
> :root# lsmod
> Module                  Size  Used by    Not tainted
> zd_b                  278240   1-->just downloaded from embedded arm
FTP site
> af_packet               9456   0  (unused)
> open_eth                4448   0  (unused)
> tsuart-73               1380   0  (unused)
> tsuart0                 9128   0 
>  [tsuart-73]
> keybdev                 1772   0  (unused)
> hid                    13520   0  (unused)
> input                   3320   0  [keybdev hid]
> usb-ohci-ep93xx          632   0  (unused)
> usb-ohci               15360   0  [usb-ohci-ep93xx]
> usbcore                55728   1  [zd_b hid usb-ohci]
> pcipool                
>  1888   1  [usb-ohci-ep93xx usb-ohci]
> ts7300fb                3944  63
> fbcon-cfb16             3528   0  [ts7300fb]
> fbgen                   2944   0  [ts7300fb]
> sdcard0                12304   1
> 
> ************************************************
> 
> and this is the network configuration:
> 
>  
> 
> wlan0     Link encap:Ethernet  HWaddr 00:02:72:5D:7C:3F
>           inet addr:192.168.1.20  Bcast:192.168.1.255 
Mask:255.255.255.0
>           UP BROADCAST MULTICAST  MTU:1500  Metric:1
>           RX packets:0 errors:2 dropped:0 overruns:0 frame:2
>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
> 
>  
> 
> wlan0     802.11b/g NIC  ESSID:"CasaOlgiate"
>           Mode:Managed  Frequency=2.437 GHz  Access Point:
Not-Associated
>           Bit Rate:11 Mb/s
>           Retry:off   RTS thr=2432 B   Fragment thr:off
>           Encryption key:****-****-****-****-****-****-**   Security
mode:open
>           Power Management:off
>           Link Quality:98/100  Signal level:98/100  Noise level:7/100
>           Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
>           Tx excessive retries:0 
>  Invalid misc:40   Missed beacon:0
> 
>  
> 
> while the interface correctly gets the access point:
> 
>  
> 
> :root# iwlist wlan0 scanning
> wlan0     Scan completed :
>           Cell 01 - Address: 00:19:5B:77:7C:04
>                     ESSID:"CasaOlgiate"
>                     Mode:Master
>                     Frequency:2.437 GHz (Channel 6)
>                     Extra:SignalStrength=100%,LinkQuality:24%
>                     Encryption
>  key:on
>                     Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
>                               12 Mb/s; 24 Mb/s; 36 Mb/s
>                     Extra:bcn_int=100
> 
>  
> 
> it still remains in Not-Associated mode and wireless network
interface doesn't ping.
> 
>  
> 
> Does someone  knows why?
> 
>  
> 
> Thanks
> 
>  
> 
> NBP
> 
You must properly set the wether encryption is Open or Restricted,
like this:
iwconfig wlan0 key open your_key_here

Since you get no asociation I assume you are using an open key (I
think restricted is the default)

Gonzalo



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU