[ts-7000] Re: TS-7260, TS-BAT3 and DIO2

["benoit.steve" <>]

So I decided to order the additional units as TS-7200 units with a TS-
5620 RTC, TS-DIO24 card and a TS-BAT3 ?

Does anyone have a pic of these units stuck togehter ?  Do they 
simply all stack together ?

Thanks 

Steve

--- In  "benoit.steve" <> 
wrote:
>
> I have been proto-typing with a TS7200 and the OP-LCD-LED module 
and 
> was disappointed that I missed the conflict with the 20 DIO lines 
and 
> their use as LCD lines.  I am using the OP-LCD-LED module for 
display 
> so my DIO lines are limited to the 9 DIO lines on the DIO1 header.
> 
> I require more additional DIO lines and am intersted in using the 
TS-
> BAT3 for power protetcion.  I'm reading switch values and was 
simply 
> mapping a switch per DIO line and not encoding the values.
> 
> Can I use a TS-7260 with the OP-LCD-LED module and a TS-BAT3 and 
still 
> have at least 15 general DIO lines to use as inputs ?  I believe 
there 
> is a header on the 7260 labelled DIO2 
> 
> Or should I stick with a TS-7200 and add a TS-DIO24 card with a TS-
> BAT3 ?
>




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/