[ts-7000] TS-7260, TS-BAT3 and DIO2

["benoit.steve" <>]

I have been proto-typing with a TS7200 and the OP-LCD-LED module and 
was disappointed that I missed the conflict with the 20 DIO lines and 
their use as LCD lines.  I am using the OP-LCD-LED module for display 
so my DIO lines are limited to the 9 DIO lines on the DIO1 header.

I require more additional DIO lines and am intersted in using the TS-
BAT3 for power protetcion.  I'm reading switch values and was simply 
mapping a switch per DIO line and not encoding the values.

Can I use a TS-7260 with the OP-LCD-LED module and a TS-BAT3 and still 
have at least 15 general DIO lines to use as inputs ?  I believe there 
is a header on the 7260 labelled DIO2 

Or should I stick with a TS-7200 and add a TS-DIO24 card with a TS-
BAT3 ?





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/