[ts-7000] I need to use DIO connected to the FPGA of TS-7300

["pekalo1" <>]

Hi..
iam new in use this kined of sys i have TS-7300 kit and i need to use 
the dio connected with the fpga. in the manual sayes : in the default
bitstrem he use the first 20 io for video ,How can i configer them as 
dio .and where is the addresses that i can control these out from it 
to configure some pins outputs and the other inputs. 
and for the DIO1 i try to use it also as dio and i disable the DMA but 
i search for the DMA address on the mmap and i didnt fount any thing 
about it ,and also i use the code of the (keypad) when i load it to 
the SBC it restarted automaticaly .can any one gives me an answer for 
that ..                   
                           thanks all..



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/