[ts-7000] USB-serial non-detection....

["squirrelinthesky" <>]

I'm kind-of stuck here, and would greatly appreciate any assistance.


I have a USB-serial device that my CentOS install will recognize as
being bound to the ftdi-sio module (which derives from usbserial).
Plugging it in will cause the ttyUSB0 device to appear, which will
work flawlessly.

However when I plug it into my WLAN box (TS-7400), kmsg will indicate
that it does not recognize the vendor/product. Fortunately, all of the
modules appear to be standard with the factory TSLinux, so I load
usbserial and ftdi-sio... But nothing happens. Shouldn't the module
pickup the device once it loads?

I also tried loading the usbserial module for the specific
vendor/product, but the device was unusable.


Dustin



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/