Re: [ts-7000] I need to use DIO connected to the FPGA of TS-7300

ts-7000

Re: [ts-7000] I need to use DIO connected to the FPGA of TS-7300

To:
Subject:	Re: [ts-7000] I need to use DIO connected to the FPGA of TS-7300
From:	David Hawkins <>
Date:	Thu, 08 Nov 2007 08:14:53 -0800

> iam new in use this kined of sys i have TS-7300 kit and i need to use 
> the dio connected with the fpga.

There is example code here for DIO1 and DIO2

http://www.ovro.caltech.edu/~dwh/ts7300/

Regards,
Dave




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] I need to use DIO connected to the FPGA of TS-7300, pekalo1 Re: [ts-7000] I need to use DIO connected to the FPGA of TS-7300, David Hawkins <=

Previous by Date:	Re: [ts-7000] Re: Running C code on FPGA, Eddie Dawydiuk
Next by Date:	[ts-7000] Boot on USB, brenesandre
Previous by Thread:	[ts-7000] I need to use DIO connected to the FPGA of TS-7300, pekalo1
Next by Thread:	[ts-7000] New SD drivers available...., dawydiuk
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU