Hi Serdar,
I had this problem and posted message #5603 regarding it.
Are you using a custom build on the TS-7400? I haven't seen this
problem with the factory shipped TS-7400s running Technologic's build.
I was using a custom build based on an early Technologic 2.4.26-ts11
kernel.
Given that no dots appear the line ">> Copyright (c) 2007, Technologic
Systems", I'd say something has gone wrong with the bootloader.
You can download TS's default shipping bootloader kernel binary or MBR
(master boot record). Take a look at:
ftp://oz.embeddedarm.com/images/mbr/
and then mtdcopy the 16KB binary into the first flash partition.
Phillip
--- In "serdar_akkan" <> wrote:
>
> hi all,
>
> 7400 gives an error when it boots. i use ts-9441 to see the console
> output. its console output is like that
>
> >> TS-FLASHBOOT - built Jan 26 2007
> >> Copyright (c) 2007, Technologic Systems
> >> flash ECC error!
>
> I placed the boot jumper of ts9441 and its working from on board flash.
> i use save command then i reset the board but it gives the same error.
>
> how can i solve this?
>
> Serdar
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|