How have you connected your TS7200 to your computer?
Is it laptop/PC ?
What port of your laptop/PC are you using ?
--- In "vidya_govindan" <> wrote:
>
>
>
> I am using hyperterminal with win XP, I connected the power supply,
> serial cable as stated by the manual. When I turned the power on, I
> see the red and green led light up and then green led stays on. So i
> am assuming that the board booted up fine. but I see nothing, no
boot
> up messages on the hyperterminal. It is just blank. I have set it to
> the correct settings as stated in the manual. What am I doing wrong?
> Is there some other settings on hyperterminal that I am missing.
Even
> with minicom, i saw no messages. Either the board is faulty or the
> COM1 port is not working. How do I determine that? I even tried COM2
> with proper jumper settings. Appreciate any help - VG
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|