[ts-7000] Porting WinCE to TS-7200

ts-7000

[ts-7000] Porting WinCE to TS-7200

To:
Subject:	[ts-7000] Porting WinCE to TS-7200
From:	"microprocessormeister" <>
Date:	Tue, 16 Oct 2007 20:49:06 -0000

Hi,

I'm new to this forum. I want to port WinCE 5.0 to my TS-7200 board.
Has any one tried this before? Specifically are any BSPs for MS
Platform Builder 5.0 available? Any pointers are welcome :)

Thanks in advance.

Regards,

Gautam Ghate



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Porting WinCE to TS-7200, microprocessormeister <=

Previous by Date:	[ts-7000] Re: Newbie with a 7200 development kit - CF boot failure, Bob Herlien
Next by Date:	Re: [ts-7000] Hyperterminal and bringing-up ts-7200, Laks
Previous by Thread:	[ts-7000] Re: Newbie with a 7200 development kit - CF boot failure, Bob Herlien
Next by Thread:	[ts-7000] Flash ECC Error, serdar_akkan
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU