thank you - it workedd fine
--- In "benoit.steve" <> wrote:
>
> Romain
>
> Thank you - I'll try this a little later today.
>
>
> --- In "bowbaq74000" <bowbaq74000@> wrote:
> >
> > Hi,
> >
> > To boot from the CFCard, you must change the RedBoot configuration.
> > To do that, you reboot your card and type "CTRL+C" when RedBoot
> start
> > (when the '+' appear).
> > After you must use the command : fconfig, then type :
> > >> fis load vmlinux
> > >> exec -c "console=ttyAM0,115200 root=/dev/hda1"
> >
> > Regards,
> > Romain
> >
> >
> > --- In "benoit.steve" <benoit.steve@>
> > wrote:
> > >
> > > Hi
> > >
> > > I have a 7200 with a dev kit and the 512Mb CF flash card w/Linux
> on
> > it
> > >
> > > How do I boot from the CF card?
> > >
> > > board boots into the onboard BusyBox linux fine.
> > >
> > > with the cf card installed, I get the error "failed to identify
> > unit 0" error msg and teh system
> > > proceeds through to regualr onboard boot
> > >
> > > without the cf card - system boots to busybox
> > >
> > > thanks
> > >
> > > steve
> > >
> >
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|