[ts-7000] Re: Newbie with a 7200 development kit - CF boot failure

["bowbaq74000" <>]

Hi,

To boot from the CFCard, you must change the RedBoot configuration.
To do that, you reboot your card and type "CTRL+C" when RedBoot start 
(when the '+' appear).
After you must use the command : fconfig, then type :
>> fis load vmlinux
>> exec -c "console=ttyAM0,115200 root=/dev/hda1"

Regards,
Romain


--- In  "benoit.steve" <> 
wrote:
>
> Hi 
> 
> I have a 7200 with a dev kit and the 512Mb CF flash card w/Linux on 
it
> 
> How do I boot from the CF card?
> 
> board boots into the onboard BusyBox linux fine.
> 
> with the cf card installed, I get the error "failed to identify 
unit 0" error msg and teh system 
> proceeds through to regualr onboard boot
> 
> without the cf card - system boots to busybox
> 
> thanks
> 
> steve
>




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/